Commercial foodservice equipment · wire harness and cord sets · Dongguan, China
Low-Temperature Flexible Power Cord Sets for Commercial Ice Machines and Dispensers
Ice machines and dispensers are wet, cold environments. Cord sets and internal harnesses there need flexible insulation, secure crimps and connectors that tolerate condensation rather than corrode.
We build these assemblies to drawing in Dongguan — cord sets, pump and valve leads, switch and sensor wiring, and LED/display connections.
What we typically build
- Power cord sets and appliance cord assemblies
- Pump, valve and water-level sensor leads
- Door, bin and switch interlock wiring
- Control board and display harnesses
- Defrost and drain heater leads
Typical build specification
| Item | Typical specification |
|---|---|
| Pitch series | GH1.25, PH2.0, XH2.5, ZH1.5, VH3.96, SH1.0 |
| Flexible wire | UL1007 / UL1015 for internal wiring; UL1571 for tight bends and low-temperature flexibility |
| Wire gauge | 16–32 AWG (24–28 AWG typical for internal signal wiring) |
| Terminations | Crimped terminals with housings, strip-and-tin ends, or double-end crimping |
| Length | Custom, typically 30–1,000 mm |
| Testing | 100% continuity and withstand-voltage before shipment |
What to send for a quote
One page is enough — these eight fields make quotes comparable between suppliers:
- Connector series and pitch (e.g. GH1.25, PH2.0, XH2.5, ZH1.5, VH3.96, SH1.0)
- Pin count and housing type (with or without latch)
- Wire gauge and UL style (e.g. UL1007 24AWG)
- Length and tolerance
- Colour or coding sequence
- Termination at each end (crimp / strip / tin / housing)
- Quantity and required delivery date
- Packing, labelling or traceability requirements
What we can show a supplier-quality reviewer
- 15 automatic terminal crimping machines in-house, with cutting, stripping, tinning, crimping and assembly done in our own workshop.
- 100% electrical testing — continuity and withstand-voltage on every piece, plus pull-test and tinning inspection sampling; an inspection report ships with the goods.
- UL-recognized AWM wire in six styles — UL1007, UL1015, UL1571, UL2651, UL3239, UL2468 — with wire certificates available from our suppliers on request.
- RoHS compliance for wire, terminals and housings, with third-party test reports available.
- Traceability: incoming-material verification, process inspection and final inspection records kept per order.
- Verification options: business licence check, on-site audit, or a live video walkthrough of the workshop.
What we do not claim
Being precise here saves both sides time: our finished assemblies are not UL-listed, and we do not hold ISO 9001, CE or NSF certification — UL applies to the wire we buy (wire-level recognition), and NSF/ETL apply to the finished appliance, not to our level of the supply chain. We build to your drawing, test 100% before shipment, and supply the documentation we actually have.
Where this is used
- Ice makers, flakers and nugget ice machines
- Ice and water dispensers
- Combination ice/beverage units
- Under-counter and countertop models
Sourcing terms
| Item | Terms |
|---|---|
| Minimum order (custom) | 1,000 pcs — below this, ask us; we will say yes or no honestly |
| Sample orders | From 50 pcs |
| Samples | Free for standard specifications; tooling or special processes are quoted separately and agreed before ordering |
| Sample lead time | 2–3 working days |
| Production lead time | 5–10 working days after order confirmation and material readiness |
| Quotation | Within 24 hours of receiving your drawing or specification |
| Quotation basis | Ex-tax by default; tax-inclusive with 13% VAT invoice available. Export orders quoted FOB Shenzhen / Guangzhou |
| Warranty | Standard items: free replacement for quality issues within 30 days of shipment (100% tested before shipment). Custom items: against the confirmed drawing |
Get a quote from your drawing
Send one drawing or part list — we reply with a quotation within 24 hours.
中文说明：制冰机/饮水设备用低温柔性电源线组与内部线束：UL 认证线材（UL1007/1015/1571 等 6 种）、端子压接+胶壳、剥皮上锡，100% 导通与耐压测试，打样 2-3 个工作日，量产 5-10 个工作日，报价 24 小时内。